Honed limestone ensuite bathroom

This ensuite bathroom came to life after the chimney from the kitchen below was taken out completely, freeing up space in this small room for features like a walk in shower, a bath and a double  sinked floating vanity unit. It also has underfloor heating which is a real pleasure in a wet room scenario.

The colour palette was deliberately muted to emphasise the simplicity of shapes and allow the bath real presence, and very much dictated by the full tiled walls in a honed grey limestone full of veins fossil and lovely pattern. Much of the strength of this design was in the fact through the limestone tiling solution mixing larger brick shaped tiles alongside the mosaics. This helps to delineate the spaces for bathing and showering. It also adds a touch of fun and texture to the room. the aesthetic is further emphasised by the mix of grand and minimal fixtures.

The bath is a Monaco free standing roll top bath. It has views over the green spaces at the rear, and a solid ash floating shelf above for toiletries.

The vanity unit with double inset sinks with tiled splash back and a side extension for out of sight' storage. The unit was created by rogue-designs and integrates

a low voltage socket in the middle unit with large pull out drawers either side.

The fact that it was an en-suite with all bathroom features meant a real crafting of the space to accommodate everything in a pleasurable way as previously the boiler cupboard was located where the WC was and the door access was where the shower was. The space was very limited and wouldn't have worked to fit all these items otherwise. The design works very well and functions practically and aesthetically within the brief.

Canal side house wetroom

Canal side house

1st floor bathroom: wetroom.

The design and fit of a bathroom that is one of the main features of Victorian houses. Despite the size of the house, the bathrooms generally all occupy very small spaces;

 this particular one is housed where an old servants staircase used to make its way up the house. Therefore the space we worked with was: 3.5metres long by 95cm wide and 3m high. Also a feature of victorian houses; the tall ceilings! We devised the design for three bathrooms; the cloakroom beneath, this wetroom, and a slightly wider main bathroom which will fit a bath. The cloakroom and main bathroom are yet to be built, but all will share the principles of sleek italian design.


In the end the space was expertly crafted and every white good was nested in place. From lowering the ceilings to cutting down vanity units, every aspect of the fit out was carefully assessed and planned out to make sure that no space was lost and that the experience was as generous as it could be, given the dimensional restrictions. 

Atmosphere and pleasure was integral to the experience we wanted to eschew and t

he owner had requested a look that was both Italian and bold and would reflect elements of their life in Florence. The design was one that we are very fond of. It had a very clear

character and a personality that we never thought possible looking at the floorplan. 

A good deal of time was spent sourcing the most appropriate items to work in this space. The washbasin is by Scarabeo Ceramiche from Italy. It's slightly dished and positioned on a slight angle to lead the eye into the room.  In the design it rests delicately on top of the wenge, floating vanity unit. 

This unit was modified to suit the space, with great care as the internal runners could not have been altered. The toilet by Vitra is concealed behind the dwarf wall that contains the cistern, and is asymmetrical. This means the floor is un-interupted and can be cleaned very easily. In order to do this we created a dummy wall, that was incredibly well anchored to the wall and floor. In fact the steel frame (gerberit) that was used had to be set into the wall in order to not exceed the width restrictions of the room.

The whole of the floor is a wetroom tray from our friends at On the Level, which has been tiled and has underfloor heating for maximum comfort. Underfloor heating also helps a wetroom to dry out quickly. The tiles are Italian porcelain in grey and matt black, in varying sizes. We created a pattern to provide architectural interest and texture.

A tiled shelf in the shower area was formed using the porcelain tiles and stainless steel edging, and continues the architectural drama of the space.

The shower is a Hans Grohe 'raindance' and we have fitted many of these. The feedback to its effectiveness has always been very good. The water (with air technology) floods rather than sprays and gives an even distribution of water. This works incredibly well in a space like this where spray would have been an issue. Alongside the raindance overhead drench unit we complimented it with the handheld spray.